ADVANTAGES
• Converter changes a digital Toslink audio signal into a digital Coaxial audio signal
(or vice versa).
• Ideal if your Audio Source has a different audio digital output than your
Audio Amplifier, for example.
• Amplifies the digital audio signal and thus extends the maximum cable length
(optical/coaxial)
• Supports the most common 2 to 5.1 channel digital audio signals.
• The digital audio signal provided is simultaneously reproduced on both outputs
(both Toslink and Coaxial).
INSTALLATION
Note:
• We recommend that you switch off your equipment before connecting cables in
order to prevent any of the devices being damaged.
• At all times, avoid bending the optical (Toslink) cable as it is very delicate.
Audio Source Audio Amplifier
1. Connect the Audio Source to one of the digital audio inputs [1] on the
Connect TC22™ using the optical or coaxial audio cable.
2. Connect the Audio Amplifier to one of the digital audio outputs [2] on the
Connect TC22™ using the optical or coaxial audio cable.
3. Connect the power adapter [3] and plug into the electrical socket.
4. Use the switch [4] to select which digital audio input (Coaxial or Optical) is
connected to the Connect TC22™.
5. Switch your device on and check that the audio connection works.
USAGE
If the audio connection does not work (properly), consult the instructions for the
Audio Source and/or the Audio Amplifier for the correct settings.
FREQUENTLY ASKED QUESTIONS
Please go to www.marmitek.com if you have any questions.
4 © MARMITEK
[1]
[4] [3]
[2]
Comments to this Manuals