Marmitek X-10Programming and Measuring InterfaceType PMIX35
101 Programming and measuring functions1.2.1 Measuring signal levelsThe measuring of signal levels in Marmitek X-10 installations allows the rapid det
0 2 V 4 V Max111 Programming and measuring functionsFigure 7: Setting the transmission level.Figure 9: Network diagnostics data.1.2.1.2 Sensitivity of
121 Programming and measuring functionsThe table below gives an overview of the various counters and their functions. All counters can be set to 0 wit
131 Programming and measuring functionsExample:Follow the steps below to automatically send two command lines to the address "A01".1. Follow
141 Programming and measuring functionsErrors in the log screen are indicated with red shading. The table below gives several examples of suspect mess
151 Programming and measuring functions1.3 Network validationIn this tab page, a quick and simple network analysis can be performed before the deliver
161 Programming and measuring functions1.3.2 Interpreting the network validation dataThe PMIX35 software will display the transmission, reception, noi
172 The PMIX35 as data interfaceThe PMIX35 supports the CTX15/35 protocol as standards and, in addition, has a number of extra functions. This means t
182 The PMIX35 as data interface2.2 Protocol description2.2.1 COM port settingsSee the figure below for the required COM port settings:2.2.2 COM port
192 The PMIX35 as data interface2.2.3 Communication formatAll communication is ASCII format. The messages between the PC application and the PMIX35 ar
2Functions• Sending and receiving commands. • Measuring the signal level and noise level of incomingmessages.• Measuring network impedance.• Sending m
202 The PMIX35 as data interfaceTransmitter Format DescriptionPC SP{D} Send Position: The position of the transmitted data on the mains voltage with r
212 The PMIX35 as data interfaceTransmitter Format DescriptionPC RQ Data Request: After the connection has been established, a Data Request is made to
222 The PMIX35 as data interfaceTransmitter Format DescriptionPC LW{LLL..L} Line Write: With this message, the PC application commands the PMIX35 to t
232 The PMIX35 as data interfaceHex Code Hex Code Hex Code Hex Code Hex Code Hex Code20 (Space) 30 0 40 @ 50 P 60 ` 70 p21 ! 31 1 41 A 51 Q 61 a 71 q2
Marmitek X-10 home automationRated voltage 230 Vac, 50 HzTotal power consumption Max. 2.5 WSignal transmission Adjustable from 0 to 5 Vpp (per 25 mV
CopyrightsMarmitek is a trademark of Pattitude B.V., PMIX35™ is a trademark of Marmitek B.V. All rights reserved. Copyright and all other proprietary
3Software installationFollow the steps below to install the PMIX35 software.Please note: Follow the installation procedure below before connecting the
4After starting up, the PMIX35 software will automatically search for the presence of a connected PMIX35 and attempt toestablish a connection. The sof
5The PMIX35 software can be used for:• Programming Marmitek X-10 modules.• Measuring and testing an installation. For this purpose the PMIX35 software
61 Programming and measuring functions1.1.1 Programming standard modulesStandard modules (without PRG function, see table 1-2) can be easily programme
71 Programming and measuring functionsPPROG.NLSAIX12PROG.5. Switch the module to programming mode by pressing the programming button for 3 seconds.6.
81 Programming and measuring functions1.1.2 Programming using automatic programming modeThe latest generation of Marmitek X-10 modules can be (re)prog
91 Programming and measuring functions3. Within 5 seconds, activate the programming mode of the module according to the table below: 1.2 AnalyzerThe
Comments to this Manuals