Marmitek PC CONTROL User Manual download pdf (Page 4)

4 MARMITEK

1. Introduction

The PC Control Remote can be use as a Wireless Mouse Remote and as a Universal

Remote Control.

To control a PC the PC Control remote works with the wireless USB receiver CM21A

(included in your PC Control kit).

The PC Control Remote is designed to control up to 6 devices (TV, VCR, DVD, SAT, PC and

Home Automation Modules or any other device under AUX mode key). The PC Control

Remote contains a library of codes that are pre-programmed into the remote control. This

library covers nearly all the audio video products on the market today.

2. Put in the batteries (always use NEW AAA alkaline batteries).

1. Open the cover on the back of the PC Control Remote.

2. Insert 4 AAA alkaline batteries, verify that they are placed correctly with the + on the

battery in the same position as marked inside the battery compartment.

3) PC operation

The PC remote works with the wireless USB receiver CM21A. The remote sends wireless

RF signals to the CM21A receiver which is connected to your PC's USB port.

The enclosed CD contains a special version of the popular ShowShifter software. You can

use ShowShifter to control your PC’s MultiMedia features. ShowShifter uses special fonts

and big buttons to let you read the information from your PC screen from a distance.

You are even able to display the information on your TV screen (to do this, your PC will

need to have a TV out connection).

TIP: Did you know that you are able to connect your PC to your TV Wireless, even from

another room? With the optional Marmitek PC to TV Sender (REF: 09516) you can. For

more information, visit www.marmitek.com.

3. PC Control operation

3.1. Software and CM21A installation.

1. Disable or turn off your anti-virus software before you install the software as some

anti-virus programs interfere with the installation. Remember to turn on your anti-virus

program when you finish the installation.

2. Install DirectX9.0a from the CD-Rom or download it from the Microsoft Website:

www.microsoft.com/directx/homeuser/downloads/default.asp If you are running

Windows XP, you do not need to install DirectX as it is already installed.

3. If you want to play compressed video files and MP3 files, install

Windows Media Player 9

from the CD-Rom or download it from the Microsoft Website:

www.microsoft.com/windows/mediaplayer/en/default.asp

4. Run ShowShifter installer from the CD-Rom. If the CD doesn’t start automatically, run

the file ShowShifter-Setup-1.55.2177.exe by hand.

5. During the installation, follow the on screen instructions. You will be informed about

available upgrades of ShowShifter. You don’t have to upgrade now.

The software installation will also launch the "X10 hardware(TM)setup" program which

will install different X10 drivers on your system (including the CM21A driver). Follow the

on screen instructions. At the appropriate point in the installation you will be instructed

to plug the CM21A (uses the same driver as the CM19A USB Firecracker Transceiver)

1 2 3 4 5 6 7 8 9 ... 55 56

Comments to this Manuals

No comments

Marmitek PC CONTROL User Manual Page 4

Comments to this Manuals