Marmitek SC9000 User's Guide download pdf (Page 19)

9. Press 2 (REPLAY) to listen to the message you have just recorded.

10.

Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you choose Yes, you will quit the

menu. If you choose No, you go back to the main menu.

6. Using the security system

6.1 Setting the alarm

The system has two different alarm functions:

ARM AWAY: Full alarm. All sensors are activated.

ARM HOME: Partial alarm. All door/window sensors are activated, but the motion detectors are not armed. This

means you can walk around in your home, while the ‘shell’ of the house is protected.

Switching on the ARM AWAY function

Via the console

Press the ARM AWAY button on the console. The system will be activated after a short delay

(delay can be set, see exit delay 8.1). During the delay you will hear a couple of tones at the same pitch.

☺ After switching the system to ARMED AWAY mode, the entry delay will be used for DS90 Door/Window Sensors (DS90 switch

set to MAX) when you enter the house. This means you have enough time to switch off the system via the console without

triggering the alarm. The delay times can be changed, see 8.1.

Via the Key Chain Remote Control KR21

Press the ARM button. The alarm is switched on instantly.

Please note: Make sure the front door is closed when you switch on the device.

Via the Comfort Remote Control SH624

Set the switch to SEC. Press the ARM AWAY button. The alarm is switched on instantly.

BASIC OPTIONS

19SAFEGUARD / TOTALGUARD

ARMED AWAY

20071_20090424_UG_SC9000_EN 30-07-2009 09:10 Pagina 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

No comments

Marmitek SC9000 User's Guide Page 19