Marmitek MegaView 121 User Manual download pdf (Page 5)

MegaView 121™ 5

ENGLISH

1. Switch off all appliances before you start connecting.

2. Connect the HDMI source (Blu-ray disc player, TV Decoder, Media

Centre PC, etc.) to the MegaView 121™ transmitter [1], using an HDMI

cable (not provided).

3. Connect the MegaView 121™ receiver to the appliance shown [2] (e.g.

HDTV or projector), using an HDMI cable (not provided).

4. Use one CAT5e/6 Ethernet cable to connect the MegaView 121™’s

transmitter to the receiver [3].

Attention! The MegaView 121 cannot be connected to an existing home

network (LAN), this may cause damage to the device.

5. Connect the power adapter [4] to the ‘5VDC’ connection on the

MegaView 121™ and plug the adapter into a socket.

Attention! Do not place the MegaView 121™ transmitter or receiver in an

enclosed space, such as a TV cabinet or equivalent. Provide adequate

ventilation to ensure that the product is functioning properly and to protect

against overheating.

6. INSTALLATION IR RETURN

The MegaView 121™ has a built-in “infrared return channel”, which allows

you to operate the connected device from another room or through closed

cabinet doors using your own remote control.

1. Connect the IR receiver to the MegaView 121™ receiver [5] and turn

the switch to IR IN.

x Position it so that it is visible to your (infrared) remote control, allowing

it to receive the transmitted commands (up to 6 metres).

x The most logical place for the IR receiver is in the vicinity of your

display device (HDTV or projector).

x By using the supplied adhesive strip, placement is possible virtually

anywhere.

x Experiment to find the right position before definitive attachment of the

IR blaster LED.

Attention! The adhesive strip may cause discolouration on certain

surfaces, or may leave adhesive residue when removed.

1 2 3 4 5 6 7 8 9 10 ... 43 44

No comments

Marmitek MegaView 121 User Manual Page 5