Marmitek SWM1P User Manual download pdf (Page 6)

Hereby make your house Marmitek X-10 compatible for these units. The

FD10’s will not only filter but will also couple the phases (please see 1).

INSTRUCTIONS FOR USE

INTRODUCTION

Congratulations on purchasing the Marmitek shutter/sunblind module for

installation behind a momentary switch or in a junction box. This module is

suited for remotely and locally operating electric sunblinds, roll down shutters,

screens and, if desired, curtains. Because of its extremely small size, the

module can be installed behind plaster depth switches and wall outlets

(minimal depth of wall box 40 mm, recommended 50 mm). Universally

applicable: total freedom of choice for brand, colour and style of switches.

Attention! Marmitek build-in modules always have to be mounted in a

wall- or junction box.

Attention! Input only suited for 230 V live potential!

FUNCTIONS

• Driving of one 230Vac motor with at most 2.5 A.

• Reacts to ON, OFF, DIM+, DIM- and extended sunblind commands.

• One free programmable address A1...P16 for operation.

• One free programmable address A1...P16 for the Preset mode.

• Preset function for programming of a preference position.

• Possibility for controlling multiple SWM1P modules to one preference

position without

Marmitek CM15Pro Computer Interface using the Preset function.

• Local lock function for inhibiting the operation of the motor for instance

during maintenance.

CONNECTION POSSIBILITIES

Suitable for connecting:

• One 2-way momentary switch with 2 make-contacts (Up/Down function).

• One 2-way momentary switch with 4 make-contacts (Up/Down, Preset and

Lock function).

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

No comments

Marmitek SWM1P User Manual Page 6