Marmitek EASY ICON 10 RF User Manual download pdf (Page 12)

• At the “add an X-10 device!” screen, press the OK key.

• Use the Side Key to Pick Device.

• Press the Security Side Key.

• Press the Side Key to select the SC9000.

• At the Security Options screen, press the Side Key to Set Password.

• Enter your 4-digit security code using the alphanumeric keys (This is your choice; do

not forget your security code.)

• Press the Side Key for the Set Console Link.

• Following the screen instructions to set your console to program mode by pressing

and holding the OK key until the console chimes. (Note: Make sure that the SC9000

is in install mode.)

• Press the Side Key for Done.(2x)

USING THE REMOTE

Pressing either the or key once at any time accesses the

favourites that you’ve set up. You can select any of your favourites by

pressing the button next to the icon you want.

Pressing either the or key a second time accesses the Marmitek

X-10 Home Automation modules that you’ve set up for All Rooms.

Use the Side Keys or the Navigation Buttons to select the icon you want to control.

Marmitek X-10 RF Devices

Selecting Marmitek X-10 from the MODE key screen displays the Pick

Group screen.

• Press the side key for the room that has the device that you want

to operate. (For example, press the Side Key for “Living Room.”)

The screen shows the device icons according to the way “Living

Room” was set up.

• Press the Side Key to see an overview of the commands that can be

send. Now press a Side Key to really send this command.

Extended Features

Note: Icons that have additional features follow with additional

screen(s) when you select the icon. This allows you to operate those

features. Some icons will only provide On or Off functions, some may

provide dimming. It depends on the device’s capabilities.

Any Side Key associated with an icon can always be used to operate the features for the

device. In addition, the Main Keys on the EasyIcon10RF remote can be used to operate

Marmitek X-10 devices in unique ways.

Note: Controls for lights are as follows:

• Prog up and down turns the light On and Off.

13EASY ICON 10 RF™

ENGLISH

1 2 ... 7 8 9 10 11 12 13 14 15

No comments

Marmitek EASY ICON 10 RF User Manual Page 12