Marmitek BoomBoom 460 User Manual download pdf (Page 6)

PAIRING AND CONNECTING

The Bluetooth amplifier must be paired with your Bluetooth-enabled device in

order to be able to stream audio. To pair the amplifier, power up the amplifier

(with volume control). Then go to the wireless settings of your Bluetooth

device and select "Scan for Bluetooth devices". If in Windows, select "Add

New Device" in the Bluetooth tab.

Once the amplifier is shown as a headset with the name "BoomBoom 460",

confirm the pairing on your device. Next your Bluetooth device will

automatically connect to the amplifier. If it doesn‘t, manually select "Connect".

If streaming from Windows, note that Windows will install drivers during the

pairing. Manually connect to the amplifier by right-clicking the headset symbol

and selecting "Connect" if Windows does not connect automatically.

After the pairing is complete audio can be streamed to the amplifier from your

device.

RECONNECTING TO THE AMPLIFIER

If the amplifier or your device is switched off, the connection will be dropped.

When the amplifier is switched back on, it will automatically pair to the last

device it was connected. or.you can manually reconnect to the amplifier by

revisiting the Bluetooth settings of your device. Then simply select the

amplifier and select “Connect". The audio streaming will resume. In Windows,

right-click the headset symbol and select "Connect".

POWER/ BLUETOOTH INDICATOR LED

The BoomBoom 460 has a multicolour indicator led. (red and green).

Red: power ON

Green: Bluetooth ON.

Red and green alternate flashing quick: Pairing mode.

Red and green alternate flashing slow: Bluetooth connection.

WIRED CONNECTION

This BoomBoom 460 can also be used as a conventional Wired Stereo

amplifier with Direct Line-In to your Panel TV or other Audio Devices simply

by connecting the 3.5mm Audio Cable from the rear of the BoomBoom 460 to

your Music Source.

1 2 3 4 5 6 7 8 9 10 11 ... 51 52

No comments

Marmitek BoomBoom 460 User Manual Page 6