Marmitek SC9000 User's Guide download pdf (Page 34)

11. Telephone functions

11.1 Calling the security system

The SC9000 alarm system is equipped with a call-in function. This means that you can ring your console remotely via any

telephone or mobile phone. You can also control your lights and devices via your phone. The system has a built-in speech chip

that guides you through the menus.

11.2 Activating the call-in function

The call-in function is switched off in the factory settings. You can switch the function on via the menu OPTIONS/ANSWER TYPE.

You can choose one of the following three options:

ANSWER ON:

Call-in activated. The time delay before the console answers the phone can be set in the menu DELAYS/ANSWER DELAY (see 8.1).

The standard delay is 30 seconds. If you use an answer phone or voice mail, we advise you to use option 3: VOICE MAIL.

ANSWER OFF:

the call-in function is deactivated (standard setting).

VOICE MAIL:

Call-in activated. Choose this option when you use the standard voicemail system offered by your telecom supplier. To access the

console, ring your home number twice. Let the phone ring for 10 seconds the first time. Hang up the phone and ring the number

again after 10 seconds, but within 30 seconds. The console will answer the phone.

Setting the call-in function:

1. To access the menu, press the menu  or menu  button. The display will now read ‘ENTER PIN’.

2. Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). For every digit entered, a * will appear

on the display.

3. When the PIN code has been entered correctly, the word ‘INSTALL’ will show up on the display.

4. Use the menu buttons / to go to menu item 7. OPTIONS. Press OK to select this menu item. You can also go to this menu

item directly by pressing a 7 on the number pad.

5. Use the menu buttons / to go to menu item ANSWER TYPE. Press OK to select this menu item.

6. You can now select ANSWER ON, ANSWER OFF or VOICE MAIL.

7. Use the menu buttons / to go to the desired menu item and press OK.

8. Press CLEAR again to quit the menu.

11.3 Operating the alarm functions via an outside phone

1. Call your home number. The console will answer.

2. You will hear ‘Please enter PIN’. Enter your PIN code.

3. If your PIN is correct, you will hear ‘PIN accepted’. If your PIN is incorrect, you will hear ‘Error’.

4. Press 0 followed by * to activate your security system.

5. Press 0 followed by # to deactivate your security system.

When you press 9 9 followed by *, the console will do a status check:

The status can be:

ARMED HOME: The system is set to ARM HOME mode.

ARMED AWAY: The system is set to ARM AWAY mode.

EXTRA OPTIONS

34 MARMITEK

20071_20090424_UG_SC9000_EN 30-07-2009 09:10 Pagina 34

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

No comments

Marmitek SC9000 User's Guide Page 34