Marmitek SC9000 User's Guide

SAFEGUARDTOTALGUARD20071 / 20090424 • SAFEGUARDTM/ TOTALGUARDTMALL RIGHTS RESERVEDUSER’S GUIDESAFEGUARDTOTALGUARDtmENGLISH20071_20090424_UG_SC9000_EN

2.3.1 Choosing your language All menu items are displayed in English. You can choose any of the other available languages. You can do this as follows:

☺ Attention: This English language user manual will only use the English menu items.2.3.2 The menu in EnglishThe menu items in the English language me

3. Installing remote controls3.1 Key Chain Remote Control KR211. CONTROLE INDICATORLights up when the remote control transmits radio signals when pres

3.2Comfort Remote Control SH624 (standard with TotalGuard, optional with SafeGuard, art. no. 09170)1. PANICWith this red button the panic alarm can be

4. Installing the sensors4.1 Door/Window Sensor DS901. Transmitter part.2. Magnet contact.3. Control Indicator – Lights up when a signal istransmitted

4.1.3 Registering a Door/Window Sensor1. To access the menu, press the menu  or menu  button. The display will now read ‘ENTER PIN’.2. Enter your 4-

4.2.2 Using the Motion Detector1. Open the battery compartment and insert the batteries (2x AA, alkaline).2. Keep the TEST button (3) pressed for abou

4.3 Smoke Detector SD10 / SD90The Marmitek Smoke Detector will make sure you are warned in case of a fire. Whenyou’re at home, the built-in siren will

5.2 Storing phone numbersThe Marmitek SC9000 console is equipped with a telephone dialler. In the case of an alarm up to 6 telephone numbers can bedia

9. Press 2 (REPLAY) to listen to the message you have just recorded. 10.Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or

IntroductionSafety warningsBASIC OPTIONS1. Your Marmitek surveillance system _________________________________________________________________ 51.1 Im

Switching on the ARM HOME functionVia the console Press the ARM HOME button on the console. The alarm is switched on instantly.Via the Key Chain Remot

2. Activate the alarm via the SH624 Comfort Remote Control Press the red PANIC button. The panic alarm is instantly triggered. Depending on the consol

7. Prevention and comfort - ‘Home Automation’ 7.1 IntroductionMarmitek Home Automation makes your home more comfortable, saves energy and offers secur

47.2 Addressing your modulesAn address can be set for every Marmitek X-10 module. This address consists of a HOUSECODE (A-P) and aUNITCODE (1-16). The

7.6 Comfort functions of the SH624 Comfort Remote Control☺ Switch and dim lights remotely. Switch the garden lamps on from your bedroom when you hear

9. Enter the time you want to lights to be switched off (24 hour notation). If you make a mistake, press CLEAR. Press OK whenyou do not want to enter

26 MARMITEK8. Advanced system functions 8.1 Setting the delaysYou can set a number of delay times via the menu DELAYS:ENTRY DELAY The time you get to

EXTRA OPTIONS27SAFEGUARD / TOTALGUARD8.3 Changing the access code (PIN)The access code is your personal secret code. After changing this code, you are

EXTRA OPTIONS28 MARMITEK6. Choose 1 for CHIME ON or 2 for CHIME OFF.7. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or

9.5 Emergency sensors (always mode)Your system also gives you the option to turn any sensor registered with the system into a so-called emergency sens

7. Prevention and comfort - ‘Home Automation’_______________________________________________________ 227.1 Introduction_______________________________

EXTRA OPTIONS30 MARMITEK6. Press the zone number (27-32) followed by the ON or OFF key to set the zone. If entry correctly, the selected zone will bec

10.Advanced Home Automation functionsIn chapter 7 you learnt how to use the Marmitek X-10 Home Automation options of your security system. But there i

10.5 All Home Automation functions at a glanceName Description Module set to addressComfort lighting You can switch your lighting using the buttons Li

To change the HouseCode: 1. To access the menu, press the menu  or menu  button. The display will now read ‘ENTER PIN’.2. Enter your 4-digit PIN co

11. Telephone functions11.1 Calling the security systemThe SC9000 alarm system is equipped with a call-in function. This means that you can ring your

EXTRA OPTIONS35SAFEGUARD / TOTALGUARDDISARMED: The system is switched off.EMERGENCY ALARM:The alarm has been triggered by a PANIC BUTTON on a remote c

Comfort Remote Control SH624 – 4x AAA batteriesWanneer de indicator op de SH624 zwak gaat branden, dienen de batterijen vervangen te worden.• If the i

What to do if you hear a repetitive one-tone signal when activating the alarm?This is normal. When activating the alarm there is an exit delay of one

38 MARMITEKTABEL SENSORSSensor Nr. Location Sensor type1 _________ _____________________________________________________________________________ ____

TECHNICAL DATASC9000 MAIN UNITSupply: 230VAC 50 Hz, 4 x AA back-upbattery - 24-hour stand-by.Supply current : < 80 mA capacitiveSignal transmissio

IntroductionThank you for purchasing this Marmitek security product. Marmitek security systems are made with care and are of the highestquality. Pleas

DECLARATION OF CONFORMITYHereby, Marmitek BV, declares that this SafeGuard/TotalGuard is in compliance with the essential requirements and otherreleva

20071_20090424_UG_SC9000_EN 30-07-2009 09:10 Pagina 41

20071_20090424_UG_SC9000_EN 30-07-2009 09:10 Pagina 42

20071_20090424_UG_SC9000_EN 30-07-2009 09:10 Pagina 43

20071_20090424_UG_SC9000_EN 30-07-2009 09:10 Pagina 44

1. Your Marmitek surveillance systemThe contents of your set:The Marmitek SafeGuard system is an effective security system for your home. In this kit

The Marmitek TotalGuard system is identical to the SafeGuard system, but also contains components for prevention and comfort.The TotalGuard system als

• You can use up to 16 wireless remote controls.• 2 inputs for wired sensors.• Silent alarm possible (no siren).• By calling the system, you can contr

Display:1. Zone numbersEvery sensor represents a so-called zone in the system. There are 30 zones for wireless sensors (numbers 1-30 on the display)an

2.2 Mounting the security consoleChoose a good space for the console and make sure you have a wall socket (230V) and a telephone connection close by.