Marmitek SC9000 User's Guide download pdf (Page 32)

10.5 All Home Automation functions at a glance

Name Description Module set to address

Comfort lighting You can switch your lighting using the buttons Lights ON and

Lights OFF on your key chain remote control. A1 and A2

Exit delay Lights are switched on during the exit delay. A1 and A2

Alarm lighting In the case of an alarm, the lights will flash during 4 minutes and

then remain on. A1 and A2

Status indicator The lights are switched on when the system is set to ARM AWAY. B1

External Siren PH7208 Extra 110dB siren. A1 or A2

Extra universal siren Connect your own siren to a Marmitek AM12 or AD10 module. B2

Sensor trigger function In case of an alarm on zone 27 to 32 an ON or OFF command is sent B7 B8 B9 B10 B11 B12

This table uses the unchanged settings for the basic console address.

10.6 Basic address for Home Automations functions

The basic address is set to control multiple Home Automation modules on the SC9000. The standard basic address is A1. The A in

this address is called the HouseCode. The HouseCode of the console, the remote controls and the Home Automation modules all

have to have the same letter. The 1 in the basic address is called the UnitCode. If your neighbours also have a Marmitek security

system, it may be necessary to change the basic addresses and the addresses of your Marmitek X-10 modules.

If you change the HouseCode of the console, the addresses for the Home Automation functions also change. Example: You

change the HouseCode from A into C.

Name Description Module set to address

Comfort lighting Reacts to the Lights ON and Lights OFF button on your key chain

remote control. C1 and C2

Exit delay Lights are switched on during the exit delay. C1 and C2

Alarm lighting In the case of an alarm, the lights will flash during 4 minutes and

then remain on. C1 and C2

Status indicator The lights are switched on when the system is set to ARM AWAY. D1

External Siren PH7208 Extra 110dB siren. C1 or C2

Extra universal siren Connect your own siren to a Marmitek AM12 or AD10 module. D2

Sensor trigger function In case of an alarm on zone 27 to 32 an ON or OFF command is sent D7 D8 D9 D10 D11 D12

EXTRA OPTIONS

32 MARMITEK

20071_20090424_UG_SC9000_EN 30-07-2009 09:10 Pagina 32

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

No comments

Marmitek SC9000 User's Guide Page 32