6
MULTIPLEXER SYSTEM OPERATION
3. DATE/TIME SET
- Setting up date and time
- 1. DATE FORM: (1) : Select one of the following appropriate date forms
to display date.
<1>DD/MM/YYYY : Day / Month / Year
<2>MM/DD/YYYY : Month / Day / Year
<3>YYYY/MM/DD : Year / Month / Day
• Set the cursor on the 3.DATE/TIME SET using
, and
keys from the
<MAIN MENU>, and then press ENTER key. [DATE/TIME SET]
screen appears.
• Press
or
key to move the cursor up and down.
• To setup date form, select one among <1>, <2> and <3> date forms
using
or
keys and change the date form using
and
keys
depending on the date display convention of each country.
• To setup date, set the cursor on the date using
and
keys,
then move to the field to change using
and
keys, and set the
value using
and
keys.
• To set up time, set the cursor on the time using
and
keys, then
move to the field to change using
and
keys, and set the value
using
and
keys.
• To escape from current setting mode, press S MENU key.
• If a user want to record the Time & Date on the picture, a user should
have "Display On" of its Time lapse VCR turned on, because this system
does not support Time & Date on display in recording mode.
4. AUTO SWITCH SET
- Set the CHANNEL DWELL TIME for AUTO SWITCH operation.
• You can set the time within the range of 0 to 30 second.
From the <MENU>, set the cursor on the 4.AUTO SWITCH SET using
and
keys, and press ENTER key. [AUTO SWITCH] screen
appears.
• Set the cursor on the appropriate channel using
and
keys, select
using
and
keys, and set using
and
keys.
• When DWELL TIME setting is completed, press the S MENU key to
return to the MAIN MENU screen.
Comments to this Manuals