Marmitek 14" COLOR OBSERVATION SYSTEM Owner's Manual download pdf (Page 25)

AUXILIARY OPERATION

2. In case of REAL TIME record mode, camera signal output is automatically switched by fields regardless of the

SW TRIGGER signal from the VCR.

In case of TIME LAPSE record mode, camera signal output is automatially switched by field or frame of the

SW TRIGGER signal from the TIME LAPSE VCR.

Switch out timing of TIME LAPSE VCR must be selected frame.

If switch out timing of TIME LAPSE VCR is selected field, the recording image missed some fields.

3. Then, press the "REC" button on the VCR.

4. To play back, press the "PLAY" button on the VCR and press the PB KEY on the monitor at the

same time.

5. Verify that the monitor is displaying a good picture from the camera and make a test recording to

verify operation of the VCR.

6. Your system is now ready to do observation recording.

* When you are operating the normal VCR, make sure the VCR is in Line or AV Mode.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 38 39

No comments

Marmitek 14" COLOR OBSERVATION SYSTEM Owner's Manual Page 25