Marmitek MS9970 User Manual download pdf (Page 12)

At the front of the modules, you’ll find 2 code

switches: Unit Code (1 through 16) and House

Code (A through O). Take care that when you are

using the modules in combination with the

security system, the House Code of the base

station and lamp module are the same. You now

can control lamp modules individually with the

SH624 remote control keys corresponding to the

unit code: 1 through 8 or 9 through 16.

Beside the security function, the base station is

also a Home Automation controller using the so-

called Marmitek X-10 protocol. In combination

with Marmitek X-10 modules, you can remotely

control lights and appliances.

Also in case of an alarm, this technology is being

used to control lights and external sirens. As such,

lights connected to the lamp module will be

switched on and off (flash) during an alarm

situation for a time period of 4 minutes. After

these 4 minutes, they will remain on at full

brightness (refer to 6.8). You can expand the

system with multiple lamp modules.

For more information about the many options of

the Marmitek X-10 system, contact the web site

(www.marmitek.com) or your dealer.

12 MARMITEK

The Marmitek Security System allows you to also

connect wired (non wireless) sensors to the

SC2800 base station. This allows the use of the

Marmitek Security System in a number of special

applications under special circumstances. You

now can e.g. still protect a door or window out of

the radio range of base station by using a wired

magnetic contact. You can now also use third

party -non Marmitek- sensors in combination with

the system. Examples of such sensors are: smoke

The sensor has to be placed on the window glass.

The glass break sensor reacts to the frequency of

breaking glass. Position the glass break sensor on

windows of which you suspect to be used during

a break in into the premises. Place the sensor in

such a way that the antenna is positioned in

vertical direction. Do not place the glass break

sensor on windowpanes which are constantly

vibrating (e.g. caused by a window fan). Further,

the GB10 has a light sensor. At dusk, a signal is

transmitted to the base station to start the

Lifestyle program.

detectors with relay output, level or temperature

sensors (freezer, etc.), flood detectors or motion

sensors for special applications.

To connect these sensors, use the special input

jack on the back of the base station. You can

connect any so-called NC (normally closed)

contact by means of the special cable supplied

with the system. You can connect multiple wired

sensors to this input. These sensors, when

connected, are automatically programmed on

zone16. In case the contact opens, the security

system will respond in the way it is programmed,

in the same way as for the other sensors (so

including telephone dialler, etc.). For erasing a

programmed zone, refer to 5.9.

4.8 PLACING OTHER (WIRED)

SENSORS

4.9 PLACING A GLASS BREAK SENSOR

(OPTION)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comments to this Manuals

No comments

Marmitek MS9970 User Manual Page 12

Comments to this Manuals

Related products and manuals for Security access control systems Marmitek MS9970