Marmitek 14" COLOR OBSERVATION SYSTEM Owner's Manual download pdf (Page 10)

AC INPUT

This is an input terminal that connects to AC 100~240V

power.

VIDEO INPUT/OUTPUT CONNECTORS

• BNC camera inputs 1~4 : These inputs are used for

standard cameras with BNC type connectors.

• Looping outputs 1~4 : These are looping outputs for

cameras on through. It can be used to display or record

the pictures on a separate monitor or recorder.

VCR VIDEO/AUDIO INPUT/OUTPUT CONNECTORS

Video/Audio input connectors are for receiving video/audio

signal from VCR or another video unit.

Video/Audio output connectors are for transmitting

video/audio signal from a camera to another monitor.

Also used in recording on VCR.

MONITOR VIDEO/AUDIO OUTPUT CONNECTORS

Video/Audio output for slave monitor. Connect via double

male to double male RCA

leads of required length.

NB : Maximum recommended distance between master

and slave monitor is 20m.

ACTION TERMINAL

To activate several kinds of detectors, such as Door Lock

and Alarm Device.

ALARM TERMINAL

CAMERA INPUT MULTI(DIN) JACKS

To connect to 4 cameras, such as our Pan/Tilt Dome

Camera and general Observation Camera.

CAMERA INPUT RJ JACKS

MAIN POWER SWITCH

MONITOR SYSTEM PART NAME

Back Panel

A) +12V

B) Audio in

C) CAPW

(Camera auto amp)

D) Video in

E) Audio out (Alarmin)

F) V-sync (Gen-lock)

A) Alarm + Gen Lock

B) B+ (DC 15V)

C) Audio out + Pan/Tilt

D) Video in

E) Audio in

F) GND

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 38 39

Comments to this Manuals

No comments

Marmitek 14" COLOR OBSERVATION SYSTEM Owner's Manual Page 10

Comments to this Manuals