22
MONITOR SYSTEM PART NAME
CHANNEL SELECT BUTTONS
- In Live / PB mode : When desired channel button is
pressed, a full screen of the channel is displayed.
- Menu(S.MENU) mode
Button : To move throughout each item of the Main
Menu or that of the sub menu to set it up.
Button : To increase or decrease the value of each
item.
- Pan/Tilt Dome Camera Control
QUAD
Quad Screen display in LIVE or PB.
AUTO
Sequentially switching the channel in only LIVE MODE
LIVE/PB
Switching the LIVE Mode or Play Back Mode.
PB THRU
Monitoring the recorded multiplexer OUT signal or
Playback signal of TIME LAPSE VCR.
ZOOM
Zooming the special part of the screen in 2 Times,
pressing the button again, the screen will be larger 2
Times, and then move the highlighted area by using the
arrow buttons (
,
,
,
).
FREEZE
When a Full screen in selected and user presses the
“FREEZE” button, the screen will be frozen, and the
alphabet “F” will be displayed on to the selected channel.
If user presses the button once more, the Freeze will be
deactivated. When a Quad screen is selected, if a user
presses the “FREEZE” button and desired channel button,
then the selected channel screen will be frozen.
IR RECEIVER
Receiving the remocon signal.
MIC
MIC input when pressed only TAlK button in the channel
selected.
S.MENU(SYSTEM MENU)
If user presses this button, it will display the setup menu.
User can change the various functional settings of this
system from the setup menu. Use the arrow buttons(
) to move from menu to menu, or change the value of
the sub menu.
ENTER / PAN/TILT
• Menu(system set-up) mode : When the modification of
each Sub Menu item is complete, press this button to
save the settings. Use this button to enter a Sub Menu of
the Main Menu or to return to the Main Menu from Sub
Menu by pressing this button on “EXIT”
• Pan/Tilt On/Off button. Assuming that Pan/Tilt dome
camera is connected to any channel, if user selects the
channel and presses this button, the Pan/Tilt control mode
will be started. And using the arrow buttons (
), user
can freely control the Pan/Tilt dome camera to its taste.
(If a user uses more than two Pan/Tilt dome camera, each
pressing the Pan/Tilt button will select from CH1 to CH4,
to control the each camera.)
TALK
Press and hold this button to talk through to the camera
and release it to receive.
ACTION
This button can lock or release the door open, or activate
other alarm device. It will be used to remotely open a
door, or activate different kinds of detectors.
(Send only trigger signal)
P. MENU (PICTURE MENU)
• Each pressing this button in VCR and Live mode, the
Sub Menu will sequentially displayed on to the screen.
Use volume buttons(
) to adjust each Sub menu and
press P. Menu button to deactivate.
• Contrast : Use to adjust the contrast of the screen.
• Brightness : Use to adjust the brightness of the screen.
• Color : Use to adjust the density of color.
• Tint : Use to adjust the tint of color.(NTSC only)
• Sharpness : Use to adjust the sharpness of color.
SPEAKER
Front Panel
1 10
11
12
13
14
15
2
3
4
5
6
7
8
9
1 3
2 4 6 8
5 7 9 10 12 1315 1411
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals