Marmitek X-10 User Manual download pdf (Page 7)

TWM4™

connecTion aPPlicaTions

Suitable for the connection of:

• Four 1-pole (rocker) switches.

• Four 1-pole, normally open contact, Momentary switches.

• Two Momentary switches with two normally open contacts (optionally with

zero position, multi-switch).

• One Momentary switch with four normally open contacts (optionally with

zero position, multi-switch).

• Four random potential-free contacts with a common contact (P contact).

Connecting wires- colour code for standard programming

The input wires are given an address and function that depends on the

programmed address and function. Please see the programming chapter for

the colour coding.

Please note: The blue input wire of the TWM4 is connected internally

to the neutral terminal. Make sure that the phase and neutral

connections are correctly connected to the module. If phase and

neutral are swapped, there will be 230 V on the input wires of the

module.

Legend for the connecting wires

Installation wires: = Brown (L or Phase)

= Blue (N of Neutral)

= Black (Switch wire)

Input wires: = Blue (Marmitek module common wire)

= Brown (Marmitek module Input wire 1)

= Red (Marmitek module Input wire 2)

= Orange (Marmitek module Input wire 3)

= Yellow (Marmitek module Input wire 4)

PROG.

TWM4

Blauw (N)

Bruin (1)

Rood (2)

(0ptioneel)

Oranje (3)

Geel (4)

Blauw

(N)

Bruin

(L)

Figuur 2.

PROG.

TWM4

Blauw (N)

Bruin (1)

Figuur 3.

Blauw (N)

Bruin

(L)

Figuur 1.

Figuur 4.

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Comments to this Manuals

No comments

Marmitek X-10 User Manual Page 7

Comments to this Manuals